Canon PowerShot SX410 IS - Manual (Page 48)

48
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
2
Choose the shutter speed.
● Press the [ ] button, press the [ ][ ]
buttons to choose the shutter speed, and
then press the [ ] button.
3
Check the exposure.
● Press the shutter button halfway to view
the exposure for your selected shutter
speed.
4
Shoot.
● On-screen image brightness in step 3, when you pressed the
shutter button halfway, may not match the brightness of your
shots.
● With shutter speeds of 1.3 seconds or slower, there will be a
delay before you can shoot again, as the camera processes
images to reduce noise.
● Set [IS Mode] to [Off] when using a tripod or other means to
secure the camera (= 60).
● If the flash fires, your shot may be overexposed. In this case, set
the flash to [ ] and shoot again (= 58).