Canon PowerShot SX410 IS User Manual
Page 88
88
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
●
Do not disconnect the adapter or unplug the power cord while
the camera is still on. This may erase your shots or damage the
camera.
●
Do not attach the adapter or adapter cord to other objects. Doing
so could result in malfunction or damage to the product.
3
Insert the coupler.
●
Holding the coupler with the terminals (1)
facing as shown, insert the coupler just
as you would a battery pack (following
step 2 in “Inserting the Battery Pack and
●
Make sure the coupler cable passes
through the port (1).
4
Close the cover.
●
Lower the cover (1) and hold it down as
you slide it, until it clicks into the closed
position (2).
5
Connect the power cord.
●
Insert the adapter plug into the end of the
coupler cable.
●
Insert one end of the power cord into the
compact power adapter, and then plug
the other end into a power outlet.
●
Turn the camera on and use it as desired.
●
When finished, turn the camera off and
unplug the power cord from the outlet.
(1)
(1)
(1)
(2)