Image viewing options, Magnifying images viewing slideshows, Images” (= 65), and “viewing slideshows” (= 65). y – Canon PowerShot SX410 IS User Manual
Page 65: Viewing slideshows, Magnifying images
65
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Viewing Slideshows
Still Images
Movies
Automatically play back images from a memory card as follows. Each
image is displayed for about three seconds.
●
Press the [ ] button, choose [ ] in the
menu, and choose the desired option
●
The slideshow will start after [Loading
image] is displayed for a few seconds.
●
Press the [
] button to stop the
slideshow.
●
The camera’s power-saving functions (= 23) are deactivated
during slideshows.
●
To pause or resume slideshows, press the [ ] button.
●
You can switch to other images during playback by pressing the
[ ][ ] buttons. For fast-forward or fast-rewind, hold the [ ][ ]
buttons down.
●
In filtered display (= 64), only images matching search
conditions are played.
Image Viewing Options
Magnifying Images
Still Images
Movies
1
Magnify an image.
●
Moving the zoom lever toward [ ] will
zoom in and magnify the image, and
[
] is displayed. You can magnify
images up to about 10x by continuing to
hold the zoom lever.
●
The approximate position of the displayed
area (1) is shown for reference.
●
To zoom out, move the zoom lever
toward [
]. You can return to single-
image display by continuing to hold it.
2
Move the display position and
switch images as needed.
●
To move the display position, press the
[ ][ ][ ][ ] buttons.
●
While [
] is displayed, you can switch
to [
] by pressing the [ ] button. To
switch to other images while zoomed,
press the [ ][ ] buttons. Press the
[ ] button again to restore the original
setting.
●
You can return to single-image display from magnified display by
pressing the [
] button.
(1)