Canon PowerShot SX410 IS - Manual (Page 20)

20
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
2
Browse through your images.
● To view the previous image, press the [ ]
button. To view the next image, press the
[ ] button.
● To access this screen (Scroll Display
mode), press and hold the [ ][ ] buttons
for at least one second. In this mode,
press the [ ][ ] buttons to browse
through images.
● To return to single-image display, press
the [ ] button.
● Movies are identified by a [ ] icon.
To play movies, go to step 3.
3
Play movies.
● Press the [ ] button, press the [ ][ ]
buttons to choose [ ], and then press the
[ ] button again.
● Playback now begins, and after the movie
is finished, [ ] is displayed.
● To adjust the volume, press the [ ][ ]
buttons.
Shooting Movies
1) Start shooting.
● Press the movie button. The camera
beeps once as recording begins, and
[ Rec] is displayed with the elapsed
time (1).
● Black bars are displayed on the top and
bottom edges of the screen, and the
subject is slightly enlarged. The black
bars indicate image areas not recorded.
● Frames displayed around any detected
faces indicate that they are in focus.
● Once recording begins, take your finger
off the movie button.
2) Finish shooting.
● Press the movie button again to stop
shooting. The camera beeps twice as
recording stops.
Viewing
After shooting images or movies, you can view them on the screen as
follows.
1
Enter Playback mode.
● Press the [ ] button.
● Your last shot is displayed.
(1)