ProSoft Technology PS-QS-1x10-0781 - Manual (Page 72)

FieldServer Configuration Manual Page 72 of 90
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-2269 Toll Free: (888) 509-1970 email: [email protected]
Appendix A.3. Disabling Statistics Display
For large configurations with many Map Descriptors there is a possibility that the FieldServer will run out out memory before the entire configuration file is loaded. In
order to conserve memory it is possible to disable the collection of per Map Descriptor statistics. This is done by adding the MD_Option parameter to the Map Descriptor
section, and setting the value to No_Stats for each Map Descriptor. If a specific Map Descriptor is to be monitored, then this setting can be omitted for that Map
Descriptor.
Setting the No_Stats option on a Map Descriptor will disable the display of statistics for that Map Descriptor in RUInet, and will cause zero values to be reflected for all
statistics relating to that Map Descriptor in RUIdebug logs.
Statistics on the Node and Connection are not affected.
Example: This example will disable statistics on SMD_11_AI_01 but not on SMD_11_MI_02.
Map_Descriptors
Map_Descriptor_Name , Data_Array_Name , Data_Array_Offset , Function , Node_Name , Object_Type , Object_Instance , MD_Option
SMD_11_AI_01
, DA_AI_01 , 0 , Passive , Virtual_Dev_11 , AI , 01 , No_Stats
SMD_11_MI_02 , DA_AI_01 , 1 , Passive , Virtual_Dev_11 , MI , 02 , -