ProSoft Technology PS-QS-1x10-0781 - Manual (Page 46)

FieldServer Configuration Manual Page 46 of 90
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-2269 Toll Free: (888) 509-1970 email: [email protected]
6.1.4 Node_Online_Bits
This Data Array function allows the user to specify Nodes and Subnets for which communication status is required.
Example:
Typical Data Array Parameters are:
Section Title
Data_Arrays
Column Title
Function Legal Values
Data_Array_Name Provide name for Data Array
Up to 15
alphanumeric
characters
Data_Format Provides Data format Bit
Data_Array_Length
If specified, this allows the user to configure the number
subsequent nodes after the Node_ID.
1 to 256
Data_Array_Function Special function for Data Array
Node_Online_Bits,
None
Node_ID*
If configured, the Node address of the specified Node will be at
offset 0. The length parameter will be used to determine the
number of Node addresses starting from the Node_ID. If not
declared or specified as -, Node_ID 0 will be at offset 0.
1 to 256, -
Subnet_ID*
This allows the subnet of the Node to be declared. If subnets
are not used, this parameter can be excluded. If specified as -,
the subnet is ignored and all Nodes will be found.
0 to 256, -
Data_Arrays
Data_Array_Name , Data_Format , Data_Array_Length , Data_Array_Function , Node_ID , Subnet_ID
Node_on_Net
, Bit , 30 , Node_Online_Bits , 1 , -
Node_on_Net1 , Bit , 30 , Node_Online_Bits , 1 , 1
Node_on_Net2 , Bit , 30 , Node_Online_Bits , 10 , 2
Node_on_Net3 , Bit , 30 , Node_Online_Bits , 10 , 3
Node_on_Net4 , Bit , 30 , Node_Online_Bits , 10 , 4
Node_on_Net5 , Bit , 30 , Node_Online_Bits , 10 , 5