ProSoft Technology PS-QS-1x10-0781 - Manual (Page 10)

FieldServer Configuration Manual Page 10 of 90
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-2269 Toll Free: (888) 509-1970 email: [email protected]
//==========================================================
//
// Client Side Connections
//
Connections
Port , Baud , Parity , Data_Bits , Stop_Bits , Protocol
, Poll_Delay
P8 , 9600 , None , 8 , 1 , Modbus_RTU , 0.100s
//==========================================================
//
// Client Side Nodes
//
Nodes
Node_Name , Node_ID , Protocol , Port
PLC 1 , 1 , Modbus_RTU , P8
The port to be connected to
defined in terms of connection
speed and properties. The protocol for the
network connected to
this port. Timing parameters on the
connection allow for fine
tuning of communications.
A name allocated to the node for
reference by the Map Descriptors.
The Node ID of the Server.
The Server Node is attached to this connection.
This section contains the parameters that describe the nature of the
physical connection to the Server Nodes.
This section defines the logical connection parameters for the Server
Nodes communicating with the FieldServer.