ProSoft Technology MVI94-DNP - Manual (Page 90)

Reference MVI94-DNP ♦ Flex I/O
User Manual DNP 3.0 Server over Ethernet Communication Module
Page 90 of 131 ProSoft Technology, Inc.
December 17, 2010
Set Processor Time Block (9970)
This block is constructed by the processor to request the module’s time. The
following table describes the format of this block.
Word Offset in Block Data Field(s) Description
0 Block ID This field contains the value of 9970 identifying
the block type to the module.
1 to 6 Not Used Not Used
When the module receives this block, it immediately constructs a response block
containing the modules current time. The following table describes the format of
this block.
Word Offset in Block Data Field(s) Description
0 Block Read ID This field contains the block identification code of
9970 for the block.
1 Block Write ID This is the next block requested by the module.
2 Year This field contains the four-digit year for the new
time value.
3 Month This field contains the month value for the new
time. Valid entry for this field is in the range of 1
to 12.
4 Day This field contains the day value for the new time.
Valid entry for this field is in the range of 1 to 31.
5 Hour This field contains the hour value for the new
time. Valid entry for this field is in the range of 0
to 23.
6 Minute This field contains the minute value for the new
time. Valid entry for this field is in the range of 0
to 59.
7 Seconds This field contains the second value for the new
time. Valid entry for this field is in the range of 0
to 59.