ProSoft Technology MVI94-DNP - Manual (Page 104)

Reference MVI94-DNP ♦ Flex I/O
User Manual DNP 3.0 Server over Ethernet Communication Module
Page 104 of 131 ProSoft Technology, Inc.
December 17, 2010
Column Variable
Name Data Range Description IF Error Config.
Value
6 Slave
Mode
Coded Value
(Bit 0=Enable,
Bit 1=Unsol
Msg, Bit 2=Use
DM, Bit 3=Auto
Time Sync)
This word contains bits that define
the slave mode. The slave mode
defines the functionality of the
slave device and can be
combined in any combination. The
fields have the following definition:
Enable-- determines if this slave
will be used. Unsol Msg-- causes
an enabled unsolicited response
message to be sent to the slave
when its RESTART IIN bit is set.
This parameter is also required for
unsolicited message reporting by
the IED unit. Use DM--uses delay
measurement.Auto Time Sync--
time synchronization used when
NEED TIME IIN bit set.
5