ProSoft Technology MVI94-DNP - Manual (Page 63)

MVI94-DNP ♦ Flex I/O Diagnostics and Troubleshooting
DNP 3.0 Server over Ethernet Communication Module User Manual
ProSoft Technology, Inc. Page 63 of 131
December 17, 2010
System Configuration Errors
Error Code Name Description
100 Too many binary input
points
Too many binary input points are configured for the
module. Maximum value is 15360.
101 Too many binary output
points
Too many binary output points are configured for the
module. Maximum value is 15360.
102 Too many counter points Too many counter points are configured for the
module. Maximum value is 480.
103 Too many analog input
points
Too many analog input points are configured for the
module. Maximum value is 960.
104 Too many analog input
points
Too many analog output points are configured for the
module. Maximum value is 960.
105 Too many binary input
events
Too many binary input events are configured for the
module. Maximum value is 400.
106 Too many analog input
events
Too many analog input events are configured for the
module. Maximum value is 400.
107 Invalid analog input
deadband
Deadband value for analog input events is out of
range. Value must be in the range of 0 to 32767.
108 Not enough memory There is not enough memory in the module to
configure the module as specified.
109 Invalid block transfer delay
for blocks 251 and 252
(error/status blocks)
Block transfer delay value specified is too low.
110 File count invalid The file count must be in the range of 0 to 6.
111 Invalid file record size The file record size must be in the range of 1 to 120.
112 Invalid block identification
code for file
The file block transfer code must be in the range of
100 to 120.