ProSoft Technology ILX56-MM - Manual (Page 79)

ILX56-MM ♦ ControlLogix Platform Diagnostics and Troubleshooting
InRAx Message Manager for Industrial Communication User Manual
ProSoft Technology, Inc. Page 79 of 112
February 6, 2012
5.3.4 Event Logs
The Event Logs page shows you recent events that have been logged by the
scanner. To open the Event Logs page, click the S
TATUS
tab, then click the
E VENT L OGS
tab.
The Event Log will display events that have been logged starting with the most
recent event. Each event has level associated with it. A level of "1" means the
event is an error, while levels 2" through "4" are information events of decreasing
importance. The scanner will log events based on the Log Level set on the
Administration/System page. A level of 0 is reserved for internal system errors.
The module will not run with a level 0 error posted.
The Event Log will display the most recent 100 of these events. To display the
next 100 events, click the N
EXT 100 button. You can continue pressing the N EXT
100 button until you have reached the last set of events. After pressing the Next
100 button, you can view the previous set of 100 events by pressing the
P
REVIOUS 100 button.
To retrieve the latest event logs, click the Reload button.
You can filter which events are displayed by setting the L
EVEL .
When the Level is
set, only events of the specified level or lower are displayed. The L
EVEL
can
never be set greater than the Log Level at which the scanner is recording events.
You can export the ordered list of events to an XML file by pressing the
E XPORT
XML button.
When examining the Event Log, if you switch to another page and then switch
back to the Event Log, the Event Log will continue to display the events that were
loaded when the Event Log was first opened. This will allow you to examine the
Event Log while switching back and forth between pages without having the log
reloaded.
See also Status.