ProSoft Technology ILX56-MM - Manual (Page 73)

ILX56-MM ♦ ControlLogix Platform Diagnostics and Troubleshooting
InRAx Message Manager for Industrial Communication User Manual
ProSoft Technology, Inc. Page 73 of 112
February 6, 2012
Runtime Triggers Status
To open the Runtime Triggers Status
page, click the S
TATUS
tab, then click the
R UNTIME
tab, then click the T
RIGGERS
tab.
The Runtime Triggers Status page contains a table that shows all of the Triggers
that are defined in the scanner along with information about each Trigger. The
information about each Trigger includes the following.
Parameter Description
Count Indicates the number of times the Trigger has fired.
Error Indicates the number of Trigger evaluation I/O errors.
Execution (Exe) Statistics are recorded only when the trigger fires. This is the
time from Trigger Condition evaluation start to when the last triggered transfer list
is complete.
Parameter Description
Exe Average Average in milliseconds of the last 16 Trigger execution times.
Exe Min Minimum Trigger execution time in milliseconds.
Exe Max Maximum Trigger execution time in milliseconds.
Cycle statistics monitor the time between trigger condition evaluations. If the
trigger condition evaluation does not fire the trigger, the Cycle Time should be
close to the Trigger Poll Period. If the trigger fires, the Cycle Time may increase
because Trigger Condition evaluation is disabled during transfer list execution.
Parameter Description
Cycle Average Average in milliseconds of the last 16 Trigger cycle times.
Cycle Min Minimum Trigger cycle time in milliseconds.
Cycle Max Maximum Trigger cycle time in milliseconds.
Error State Flag This is set on the first encountered error and cleared on the next
successful Transfer List completion.
Compare Tag 1 Provides detailed status information such as Error Count, Recent Error,
and Error History.
Compare Tag 2 Provides detailed status information such as Error Count, Recent Error,
and Error History.
To update the status while viewing the Runtime Triggers Status page, click the
R
EFRESH
button.
To reset all of the runtime statistics while viewing the Runtime Trigger Status
page, click the R
ESET S TATISTICS
button.