ProSoft Technology ILX56-MM User Manual
Page 26
Administration
ILX56-MM ♦ ControlLogix Platform
User Manual
InRAx Message Manager for Industrial Communication
Page 26 of 112
ProSoft Technology, Inc.
February 6, 2012
System functions you can execute on the module include
Function
Description
Backup
Choose which settings from the module you would like to backup by
checking C
ONFIGURATION
and/or A
DMINISTRATIVE
S
ETTINGS
. Then click the
B
ACKUP
button to backup the current module configuration(s) to a file on
your computer.
A
DMINISTRATIVE
S
ETTINGS
backs up all module configuration settings,
including network settings, device name, and so on.
C
ONFIGURATION
backs up the only the information that pertains to the
transfer of data. You can then use this backup file to configure another
module with the same settings.
Restore
Click the B
ROWSE
button to select a previously saved configuration file
from your computer.
Click the R
ESTORE
button to restore the module to the state saved in the
configuration file.
The module is rebooted after the configuration is restored. You will be
prompted to confirm the configuration restore and reboot.
Set Log Level
Set the log level at which the scanner module will record events.
Level 1 logs errors only. This is the recommended setting for most
applications.
Levels 2
through 4
log informational events in increasing detail. Use
these levels for troubleshooting and support.
Level 0 logs only internal system errors.
The scanner must be restarted before the new log level will take effect.
Click the R
EINITIALIZE
button to restart the scanner. You will be prompted
to confirm the reinitialize.
Clear Event Logs
Clears the entire Event Log from the module. This cannot be undone.
Update
You can update the module's firmware from this page. You should only
update the firmware if you have been directed to do so by ProSoft
Technical Support.
Click the B
ROWSE
button to select the firmware file on your computer.
Firmware files have the file extension "fwa".
Click the U
PDATE
button to perform the update on the module. You will be
prompted to confirm the update.
IMPORTANT: Do not cycle power or disconnect the
Ethernet cable until the update is complete.
Important: You must clear your browser's cache (Tools/Delete Browsing
History/Temporary Internet Files) after rebooting the module to ensure
the old pages have been cleared from your browser's memory.
Reboot
Click the R
EBOOT
button to reboot the module. You will be prompted to
confirm the reboot.
Note: You must be logged on as a user with Administrator privilege to modify the settings on this
page.