ProSoft Technology ILX56-MM - Manual (Page 101)

ILX56-MM ♦ ControlLogix Platform Reference
InRAx Message Manager for Industrial Communication User Manual
ProSoft Technology, Inc. Page 101 of 112
February 6, 2012
Error Code Description
228h S7L duplicate address
229h S7L no device
22Ah S7L general
240h Dev IpAddr required
241h Tag Address required
242h Tag Address format
243h Tag S7Type required
244h Tag S7Type format
245h Too many configured PLCs
Scanner Errors
Error Code Description
801h General (internal) error
802h Unsupported functionality
803h Out of memory
804h Timeout error
805h Bad parameter
806h Access denied (probably instance not opened)
807h Aborted by user
808h Tag not readable
809h Tag not writable
850h Comparison failure
851h Comparison overflow
852h Tag data conversion error
853h Tag data conversion overflow
As you can see, the actual transfer mechanism in the ILX56-MM is far removed
from the messaging layer. Therefore, many of the errors pertain to the scanner,
driver, and Application Programming Interface (API).
If the error count value is not cleared, then the count will rollover to zero when it
reaches the decimal value of 65535 and must be incremented again.
The "Transfer Error Count" will NOT necessarily correlate with the error counts
shown on the "Status-Runtime-Transfer Lists" page.
If status data transfer fails, it will be logged into the event log.