ProSoft Technology ILX56-MM - Manual (Page 47)

ILX56-MM ♦ ControlLogix Platform Configure the ILX56-MM module
InRAx Message Manager for Industrial Communication User Manual
ProSoft Technology, Inc. Page 47 of 112
February 6, 2012
Each Device has the following unique parameters.
Parameter Description
Node Address The Modbus Node Address of the slave device to connect to the
module. If you are connecting to a Quantum PLC via a bridge, enter the
Modbus node address of the device connect to the module. If you are
directly connecting to a Quantum PLC, set this to 0.
Message Idle Time The idle time between messages in milliseconds. Range is 0 to 50.
Register Addressing Type The type of addressing used to access Long Integers and Floating Point
data, where:
Normal Longs/Floats occupy two 16-bit registers.
Register order is normal.
Modicon Longs/Floats occupy two 16-bit registers.
Register addressing order is WORD reversed.
32-bit Longs/Floats occupy one 32-bit register.
Maximum Data Bytes The maximum number of register or coil data bytes contained in a
single MODBUS message body. Valid options are 4, 32, 64, 128, 192,
and 244. If an array tag is larger than this value, multiple messages
may be used to complete the data access.