ProSoft Technology ILX56-MM - Manual (Page 102)

Reference ILX56-MM ♦ ControlLogix Platform
User Manual InRAx Message Manager for Industrial Communication
Page 102 of 112 ProSoft Technology, Inc.
February 6, 2012
6.4.7 Commonly Posted Context Strings
“reading cmpVal 1 (TagPath), trig TrigName”
TagPath = Full path to tag (EnetBridge\PLC5\N7:1 for example).
TrigName = Configured trigger name.
“reading cmpVal 2 (TagPath), trig TrigName”
TagPath = Full path to tag (EnetBridge\PLC5\N7:1 for example).
TrigName = Configured trigger name.
"evaluating compare values, trigger TrigName"
TrigName = Configured trigger name.
Note – this is normally associated with data compare errors (850h or 851h).
“xferlist TransferListName, seq SequenceNumber”
TransferListName = Configured transfer list name.
SequenceNumber = Configured transfer list sequence number.
Note – this is normally associated with data conversion errors (852h or 853h).
“reading TagPath, xferList TransferListName, seq SequenceNumber”
TagPath = Full path to tag (EnetBridge\PLC5\N7:1 for example).
TransferListName = Configured transfer list name.
SequenceNumber = Configured transfer list sequence number.
Note – This is posted as a result of a transfer source read error.
“writing TagPath, xferList TransferListName, seq SequenceNumber”
TagPath = Full path to tag (EnetBridge\PLC5\N7:1 for example).
TransferListName = Configured transfer list name.
SequenceNumber = Configured transfer list sequence number.
Note – This is posted as a result of a transfer destination write error.
6.4.8 Clearing the Error Counts
The transfer status error counts may be cleared collectively in two ways:
1 The unit is rebooted.
2 A Clear T
RANSFER S TATUS D ATA
button will be provided on the "Status-
Runtime-Transfer Lists" page as shown below.