ProSoft Technology ILX56-MM - Manual (Page 72)

Diagnostics and Troubleshooting ILX56-MM ♦ ControlLogix Platform
User Manual InRAx Message Manager for Industrial Communication
Page 72 of 112 ProSoft Technology, Inc.
February 6, 2012
Runtime Triggers Status
To open the Runtime Interface Status
page, click the S
TATUS
tab, then click the
R UNTIME
tab, then click the I
NTERFACE
tab.
The Runtime Interfaces Status page contains a table that shows all of the
Interfaces that are defined in the scanner along with information about each
Interface. The information about each Interface includes the following.
Parameter Description
Count Indicates the number of times the Interface has fired.
Packet Retry Count Indicates the number of times a packet send was re-sent to the
controller.
Packet Error Count Indicates the number of times an error occurred sending a packet to the
controller.
Tag Access Count the total number of times that the tags in the controller have been
accessed ( read or write).
Tag Access Error Count The total number of errors that have occurred in while reading or writing
tags in the controller.
Error State Flag the current error number occurring in the driver or device. This gets
cleared when their is no error.
Details A string that describes the last error that occurred in the driver or
device. This does NOT get cleared when the error goes away.
To update the status while viewing the Runtime Interface Status page, click the
R
EFRESH
button.
To reset all of the runtime statistics while viewing the Runtime Interface Status
page, click the R
ESET S TATISTICS
button.