5 time, 8 diagnostic, 1 ping – PLANET ADN-4101 User Manual
Page 68: 5 time………………………………………………………………………………………… 63, 8 diagnostic …………………………………………………………………………………………63, 1 ping …………………………………………………………………………………………63
802.11n Wireless ADSL2/2+ Router
ADN-4101
3.7.5 Time
Choose Admin > Time and the page shown in the following figure appears. You can configure the system time
manually or get the system time from the time server.
The following table describes the parameters on this page:
Field
Description
System Time
Set the system time manually.
NTP Configuration
State
Select enable or disable NTP function. You need to enable NTP if you want to
configure the parameters of NTP.
Server
Set the primary NTP server manually.
Server 2
Set the secondary NTP server manually.
Time Zone
Choose the time zone in which area you are from the drop down list.
3.8 Diagnostic
In the navigation bar, click Diagnostic. The Diagnostic page displayed contains Ping, Traceroute, OAM Loopback,
ADSL Statistics and Diag-Test.
3.8.1 Ping
Choose Diagnostic > Ping and the page shown in the following figure appears.
The following table describes the parameter and button on this page:
Field
Description
Host
Enter the valid IP address or domain name.
Ping
Click it to start to Ping.
63