PLANET ADN-4101 - Manual (Page 62)

802.11n Wireless ADSL2/2+ Router
ADN-4101
3.6.5 SNMP
Choose Advance > SNMP and click Enable SNMP, and the page shown in the following figure appears. You can
configure the SNMP parameters.
The following table describes the parameters on this page:
Field
Description
Enable SNMP
Select it to enable SNMP function. You need to enable SNMP, and then you
can configure the parameters on this page.
Trap IP Address
Enter the trap IP address. The trap information is sent to the corresponding
host.
Community Name
(Read-only) The network administrators must use this password to read the information of
this router.
Community Name
(Read-Write)
The network administrators must use this password to configure the
information of the router.
3.6.6 Parent Control
Choose Advance > Parent Control and the page shown in the following figure appears. This page is used to control
children's online time. The PC with specified MAC or IP address can only surf the internet within the specified period
of time
57