PLANET ADN-4101 - Manual (Page 64)

802.11n Wireless ADSL2/2+ Router
ADN-4101
3.6.8 Others
Choose Advance > Others and the page shown in the following figure appears. The page displayed contains Bridge
Setting, Client Limit, and Others.
3.6.8.1 Bridge Setting
Choose Advance > Others > Bridge Setting and the page shown in the following figure appears. This page is used
to configure the bridge parameters. You can change the settings or view some information on the bridge and its
attached ports.
The following table describes the parameters and button on this page:
Field Description
Aging Time If the host is idle for 300 seconds (default value), its entry is deleted from the
bridge table.
802.1d Spanning Tree You can select Disable or Enable.
Select Enable to provide path redundancy while preventing undesirable loops
in your network.
Show MACs Click it to show a list of the learned MAC addresses for the bridge.
Click Show MACs and the page shown in the following figure appears. This table shows a list of learned MAC
addresses for this bridge.
59