PLANET ADN-4101 - Manual (Page 38)

802.11n Wireless ADSL2/2+ Router
ADN-4101
The following table describes the parameters on this page:
Field Description
VPI The virtual path identifier of the ATM PVC.
VCI The virtual channel identifier of the ATM PVC.
QoS The QoS category of the PVC. You can choose UBR, CBR, rt-VBR, or nrt-VBR.
PCR Peak cell rate (PCR) is the maximum rate at which cells can be transmitted along a
connection in the ATM network. Its value ranges from 1 to 65535.
CDVT Cell delay variation tolerance (CDVT) is the amount of delay permitted between ATM cells
(in microseconds). Its value ranges from 0 to 4294967295.
SCR Sustained cell rate (SCR) is the maximum rate that traffic can pass over PVC without the
risk of cell loss. Its value ranges from 0 to 65535.
MBS Maximum burst size (MBS) is the maximum number of cells that can be transmitted at the
PCR. Its value ranges from 0 to 65535.
3.4.2.4 ADSL Settings
Click ADSL Settings in the left pane and the page shown in the following figure appears. On this page, you can select
the DSL modulation. Mostly, you need to remain this factory default settings. The router supports these modulations:
G.Lite, G.Dmt, T1.413, ADSL2 and ADSL2+. The router negotiates the modulation modes with the DSLAM.
33