PLANET ICS-2100 - Manual (Page 54)

User’s Manual of ICS-210x
-50-
none, HW
The default value is “none”.
• Delimiter Character The Character 1 and Character 2 allow the use to enter two ASCII
character (in hex format) that delimit the beginning and end of a message. When
a message with both there delimiters is received at the serial port, the data
contained in the serial buffer is paced in an Ethernet packet and sent out the
Ethernet port.
Silent Time: For the defined period of time passed, the serial port stops data
transmission and close the connection to remote host.
Drop Character: If the incoming data contain character 1 or character 2, the
packet will be dropped
The default value is “Disable”