PLANET ICS-2100 - Manual (Page 46)

User’s Manual of ICS-210x
-42-
5. While the Telnet window appears, type “open xxx,xxx,xxx,xxx”, xxx is the IP address of the ICS-210x Telnet Server. In
this case we type “ open 192.168.0.100 ” and press enter.
Figure 4-42 Example Windows Excuse - Telnet
6. Then can use the telnet connection to configure the switch just like console direct connect to the COM port of the switch.
Figure 4-43 Example Windows Excuse - Telnet
7. To quit the Telnet session, press “CTRL+]” and then type “quit”
Figure 4-44 Example Windows Excuse - Telnet