PLANET ICS-2100 - Manual (Page 22)

User’s Manual of ICS-210x
-18-
4. WEB MANAGEMENT
The ICS-210x Industrial Web Smart Serial Converter provide Web interface for Converter smart function configuration and
make the Converter operate more effectively - They can be configured through the Web Browser. A network administrator can
manage and monitor the ICS-210x from the local LAN. This section indicates how to configure the Industrial Serial Converter
to enable its smart function.
4.1 Main Menu
After a successful login, the main screen appears, the main screen displays the converter Welcome page. The screen in
Figure 4-1 appears.
Figure 4-1 Web Main screen
As listed at the left of the main screen, the configurable smart functions are shown as below:
„ System – Check the hardware, software version and System MAC address and IP address
of the converter. And the password changed firmware upgrade / factory default /
system reboot.
„ Network Configuration- Setup the IP address of the converter.
„ Operation Mode – Setup the serial port mode: “TCP server”, “TCP client”, “UDP client”, “Virtual
COM”, “Telnet Server”, “Pair Connection – Remote (Master)” and “Pair
Connection – Remote (Slave)”.
„ Serial Port Configuration- Setup the serial port value.
„ SMTP- Setup the SMTP mail parameters for further operation of events.