PLANET ICS-2100 - Manual (Page 41)

User’s Manual of ICS-210x
-37-
Figure 4-32 Example: Virtual COM Configuration screen
Hyper Terminal setup a new connection with virtual COM port
5. On the File menu, click New Connection.
6. In the Name box, type a name that describes the connection.
7. In the Icon box, click the appropriate icon, and then click OK.
Figure 4-33 Example: HyperTerminal Configuration screen
8. In the Connect to dialog box, choose which port you want to use in the Connect using drop-down box. In this case,
choose COM9 (as created in Step-4)