PLANET ICS-2100 - Manual (Page 45)

User’s Manual of ICS-210x
-41-
Example 1: Telnet Command in Windows Platform
Figure 4-40 Example Telnet Server
Setup Operation Mode and Serial Port of ICS-210x
1. Set the ICS-210x mode to “Telnet server mode” from web interface.
2. Set the Serial Port Configuration of ICS-210x as below:
Mode: RS-232
Baudrare: 9600
Character Bits: 8
Parity Type : none
Stop Bit : 1
Hardware Flow Control: none
Execute “Telnet” command from Windows Start Menu
3. Click the Start Menu and go to Run
4. Type "telnet" without the quotes and hit enter.
Figure 4-41 Example Windows Excuse - Telnet