PLANET ICS-2100 - Manual (Page 30)

User’s Manual of ICS-210x
-26-
Figure 4-13 TCP Server mode
The screen in Figure 4-13 appears. When the changed operation mode, the user should be changed the Serial Port
Configuration.
Figure 4-14 TCP Server Configuration screen
The page includes the following fields:
• Serial Port Operation Mode
Choose different mode:
„ TCP Server
„ TCP Client
„ UDP Client
„ Virtual COM
„ Telnet Server
„ Pair Connection - Local(Master)
„ Pair Connection - Remote(Slave)
The default mode is “Disable”.
• TCP Port Number The TCP port that ICS-210x uses to listen to connections and that other device
must use to contact ICS-210x. To avoid conflicts with well known TCP ports, the
default is set to “1024”.
• Inactive Timeout Use the parameter to set an inactive timeout. The unit drops the connection if
there is no activity on the serial line before the set time expires. To disable the
inactive timeout enter “0”.