PLANET ICS-2100 - Manual (Page 34)

User’s Manual of ICS-210x
-30-
Figure 4-20 Example: Hyper Terminal configuration
Value Description
Host address The address or name of the connection you want to create. This can be in standard Internet
dotted notation (for example, w.x.y.z) or can be the site's user-friendly name.
port The number of the port that you want the connection to use. Port 23 is the default.
10. Then can use the console like connect the serial cable with the switch.
Figure 4-21 TCP/IP Winsock connection screen