PLANET WNAP-3000PE User Manual

Page 80

Text mode
Original mode

4. Click on the Properties button. You should then see a screen like the following.

Figure 12: TCP/IP Properties (Windows Vista)

5. Ensure your TCP/IP settings are correct.

Using DHCP

To use DHCP, select the radio button Obtain an IP Address automatically. This is the
default Windows setting. To work correctly, you need a DHCP server on your LAN.

Using a fixed IP Address ("Use the following IP Address")

If your PC is already configured for a fixed (specified) IP address, no changes are
required.

(The Administrator should configure the Wireless Access Point with a fixed IP address
from the same address range used on the PCs.)