Appendix b windows tcp/ip, Overview, Checking tcp/ip settings - windows 9x/me – PLANET WNAP-3000PE User Manual

Page 71

Appendix B
Windows TCP/IP

Overview

Normally, no changes need to be made.

• By default, the Wireless Access Point will act as a DHCP client, automatically

obtaining a suitable IP Address (and related information) from your DHCP Server.

• If using Fixed (specified) IP addresses on your LAN (instead of a DHCP Server),

there is no need to change the TCP/IP of each PC. Just configure the Wireless
Access Point to match your existing LAN.

The following sections provide details about checking the TCP/IP settings for various
types of Windows, should that be necessary.

Checking TCP/IP Settings - Windows 9x/ME:

7. Select

Control Panel - Network. You should see a screen like the following:

Figure 3: Network Configuration

8. Select

the

TCP/IP protocol for your network card.