PLANET WNAP-3000PE - Manual (Page 40)

6.5 Advanced Setting
Clicking the Advanced Settings link on the Wireless menu will result in a screen like
the following.
Data - Advanced Settings Screen
Options
Worldwide Mode
(802.11d) Enable this setting if you wish to use this mode, and your
Wireless stations support this mode.
WMM
Enable WMM Sup-
port Check this to enable WMM (Wi-Fi Multimedia) support in
the Access Point. If WMM is also supported by your
wireless clients, voice and multimedia traffic will be given
a higher priority than other traffic.
No Acknowledge-
ment If enabled, then WMM acknowledgement is disabled.
Depending on the environment, disabling acknowledge-
ment may increase throughput slightly.
Parameters
Disassociated Time-
out This determines how quickly a Wireless Station will be
considered "Disassociated" with this AP, when no traffic is
received. Enter the desired time period.
Fragmentation
Length Enter the preferred setting between 256 and 2346. Nor-
mally, this can be left at the default value.
Beacon Interval Enter the preferred setting between 20 and 1000. Nor-
mally, this can be left at the default value.
35