PLANET WNAP-3000PE - Manual (Page 13)

Chapter 4
Status
This page show the relative information of WNAP-3000PE.Please see the below
tables shown.
Data - Status Screen
Access Point
Access Point Name The current name will be displayed.
MAC Address The MAC (physical) address of the WNAP-3000PE.
Country/Domain The region or domain, as selected on the System screen.
Hardware Version The version of the hardware currently used.
Firmware Version The version of the firmware currently installed.
TCP/IP
IP Address The IP Address of the WNAP-3000PE.
Subnet Mask The Network Mask (Subnet Mask) for the IP Address
above.
Gateway Enter the Gateway for the LAN segment to which the
WNAP-3000PE is attached (the same value as the PCs on
that LAN segment).
DHCP Client This indicates whether the current IP address was obtained
from a DHCP Server on your network.
It will display "Enabled" or "Disabled".
8