PLANET WNAP-3000PE - Manual (Page 47)

Data - Config File Screen
Backup
Save a copy of
current settings Once you have the WNAP-3000PE working properly, you
should back up the settings to a file on your computer. You
can later restore the settings from this file, if necessary.
To create a backup file of the current settings:
• Click
Back Up.
• If you don't have your browser set up to save
downloaded files automatically, locate where you want
to save the file, rename it if you like, and click Save.
Restore
Restore saved
settings from a file To restore settings from a backup file:
1. Click
Browse.
2. Locate and select the previously saved backup file.
3. Click
Restore
Defaults
Revert to factory
default settings To erase the current settings and restore the original fac-
tory default settings, click Set to Defaults button.
Note:
• This will terminate the current connection. The WNAP-
3000PE will be unavailable until it has restarted.
• By default, the WNAP-3000PE will act as a DHCP
client, and automatically obtain an IP address. You will
need to determine its new IP address in order to re-
connect.
42