PLANET WNAP-3000PE - Manual (Page 48)

7.4 SNMP
SNMP (Simple Network Management Protocol) is only useful if you have a SNMP
program on your PC. To reach this screen, select SNMP in the Management section
of the menu.
Data - SNMP Screen
General
Enable SNMP Use this to enable or disable SNMP as required
Community Enter the community string, usually either "Public" or "Private".
Access Rights Select the desired option:
• Read-only - Data can be read, but not changed.
• Read/Write - Data can be read, and setting changed.
Managers
Any Station The IP address of the manager station is not checked.
Only this station The IP address is checked, and must match the address you
enter in the IP address field provided.
If selected, you must enter the IP address of the required
station.
Traps
Disable Traps are not used.
Broadcast Select this to have Traps broadcast on your network. This
makes them available to any PC.
43