PLANET WNAP-3000PE - Manual (Page 24)

6.2 Virtual AP Settings
Clicking the Virtual APs link on the Wireless menu will result in a screen like the
following.
Data - Virtual AP Settings Screen
VAPs
VAP List All available VAPs are listed. For each VAP, the following
data is displayed:
• *
If displayed before the name of the VAP, this indi-
cates the VAP is currently enabled. If not
displayed, the VAP is currently disabled.
• VAP Name
The current VAP name is displayed.
• [SSID]
The current SSID associated with this VAP.
• Security System
The current security system (e.g. WPA-PSK ) is
displayed.
Enable Button Enable the selected VAP.
Configure Button Change the settings for the selected VAP.
Disable Button Disable the selected VAP.
Isolation
Isolate all Virtual APs
from each other If this option is enabled, wireless clients using different
VAPs (different SSIDs) are isolated from each other, so
they will NOT be able to communicate with each other.
They will still be able to communicate with other clients
using the same profile, unless the "Wireless Separation"
setting on the "Advanced" screen has been enabled.
19