PLANET WNAP-3000PE - Manual (Page 43)

Chapter 7
Management
7.1 Basic Settings
The Admin Login screen allows you to assign a password to the WNAP-3000PE. This
password limits access to the configuration interface. The default password is pass-
word. It is recommended to change it for security consideration.
Data - Admin Login Screen
Login
User Name Enter the login name for the Administrator.
Change Admin Pass-
word If you wish to change the Admin password, check this
field and enter the new login password in the fields
below.
New Password Enter the desired login password.
Repeat New Password Re-enter the desired login password.
Admin Connections
Allow Admin connec-
tions via wired
Ethernet only If checked, then Admin connections via the Wireless
interface will not be accepted.
38