PLANET WNAP-3000PE - Manual (Page 61)

9. Select Computer, then click Next.
10. Ensure that your certificate authority is checked, then click Next.
11. Review the policy change information and click Finish.
12. Click Start - Run, type cmd and press enter.
Enter secedit /refreshpolicy machine_policy
This command may take a few minutes to take effect.
Internet Authentication Service (Radius) Setup
1. Select Start - Programs - Administrative Tools - Internet Authentication Service
2. Right-click
on Clients, and select New Client.
3. Enter a name for the access point, click Next.
4. Enter the IP address of the WNAP-3000PE, and set the shared secret, as entered
on the Security Profile screen of the WNAP-3000PE.
5. Click Finish.
6. Right-click on Remote Access Policies, select New Remote Access Policy.
7. Assuming you are using EAP-TLS, name the policy eap-tls, and click Next.
56