PLANET LRP-822CS - Manual (Page 71)

User’s Manual of LRP-822CS
71
4.2.7.6 SNMP User
Configure SNMPv3 users table on this page. Each SNMPv3 user is defined by a unique name. Users must be configured with a
specific security level and assigned to a group. The SNMPv3 group restricts users to a specific read, write, and notify view. The
entry index key is User Name. The SNMPv3 User Setting screens in Figure 4-2-29 & Figure 4-2-30 appear.
Figure 4-2-29 SNMPv3 Users Configuration Page Screenshot
The page includes the following fields:
Object Description
 User Name A string identifying the user name that this entry should belong to.
The allowed string length is 1 to 16.
 Group The SNMP Access Group. A string identifying the group name that this entry
should belong to.
 Privilege Mode Indicates the security model that this entry should belong to. Possible security
models are:
 NoAuth: None authentication and none privacy.
 Auth: Authentication and none privacy.
 Priv: Authentication and privacy.
The value of security level cannot be modified if entry already exists. That means
you must first ensure that the value is set correctly.
 Authentication
Protocol Indicates the authentication protocol that this entry should belong to. Possible
authentication protocols are:
 None: None authentication protocol.
 MD5: An optional flag to indicate that this user using MD5
authentication protocol.
 SHA: An optional flag to indicate that this user using SHA
authentication protocol.
The value of security level cannot be modified if entry already exist. That means
you must first ensure that the value is set correctly.
 Authentication
Password A string identifying the authentication pass phrase. For both MD5 and SHA
authentication protocol, the allowed string length is 8 to 16.
 Encryption Protocol Indicates the privacy protocol that this entry should belong to. Possible privacy