PLANET LRP-822CS - Manual (Page 216)

User’s Manual of LRP-822CS
216
4.9.1.3 802.1X Port Setting
This page allows you to configure the IEEE 802.1X Port Setting. The 802.1X Port Setting screens in Figure 4-9-5 & Figure 4-9-6
appear.
Figure 4-9-5 802.1X Port Setting Page Screenshot
The page includes the following fields:
Object Description
 Port Select port from this drop-down list
 Mode If NAS is globally enabled, this selection controls the port's authentication mode.
The following modes are available:
 No Authentication
 Authentication
 Force Authorized
In this mode, the switch will send one EAPOL Success frame when the
port link comes up, and any client on the port will be allowed network
access without authentication.
 Force Unauthorized
In this mode, the switch will send one EAPOL Failure frame when the
port link comes up, and any client on the port will be disallowed network
access.
 Reauthentication
Enable If checked, successfully authenticated supplicants/clients are reauthenticated
after the interval specified by the Reauthentication Period. Reauthentication for