PLANET LRP-822CS - Manual (Page 19)

User’s Manual of LRP-822CS
19
1.5 Product Specifications
Model LRP-822CS
Hardware Specifications
Copper
2 x 10/100/1000BASE-T RJ45
Auto-negotiation/ Auto-MDI/MDI-X
Fiber Optic
2 x 100/1000BASE-X SFP slot
Supports 100/1000Mbps dual mode and DDM
Ethernet
Interfaces
Jumbo Frame 10Kbytes with GE1 to GE4
Connectivity
8 x BNC female connectors
Long Reach PoE over coaxial PSE (Power Source Equipment)
 BNC center pole : DC+ / Hi
 BNC shield : DC - / Lo
Power Output Per port 54V DC, 36 watts max.
Total Power Budget
240 watts (max.) @ 25 degrees C
200 watts (max.) @ 50 degrees C
Cabling
Coaxial cable: 75 ohm
RG-6/U cable (Recommended)
Maximum Distance
Max. 200m with PoE+ output (1,640ft.)
Max. 400m with PoE output (2,624ft.)
Max. 1200m without PoE output (3,937ft.)
Long Reach
Ethernet Standard
IEEE 1901
Modulation Type Wavelet-OFDM
Security 128-bit AES encryption
Frequency Band 2 ~ 28MHz
Long Reach PoE
Interfaces
Performance
Data Rate* RG-6/U
Distance TX** RX**
LRP-101CE
PoE Output@25 degrees C*
200m 93.2Mbps 92.0Mbps 22.9W
400m 82.4Mbps 76.3Mbps 18.7W
600m 77.2Mbps 62.3Mbps 15.0W
800m 60.2Mbps 54.3Mbps 10.4W
1000m 38.1Mbps 38.1Mbps 7.8W
1200m 25.6Mbps 25.0Mbps ---
* The actual data rate and PoE output vary on the quality of the copper wire and
environmental factors. The performance result above is based on the testing via
the RG-6/U coaxial cable.
** TX: LRP-822CS to LRP-101CE; RX: LRP-101CE to LRP-822CS.