PLANET LRP-822CS User Manual
Page 28
User’s Manual of LRP-822CS
28
Figure 2-1-7 Plug in the SFP transceiver
Approved PLANET SFP Transceivers
PLANET LRP Managed Switch supports both single mode and multi-mode SFP transceiver. The following list of approved
PLANET SFP transceivers is correct at the time of publication:
Gigabit SFP Transceiver Modules
MGB-GT
SFP-Port 1000BASE-T Module
MGB-SX
SFP-Port 1000BASE-SX mini-GBIC module
MGB-LX
SFP-Port 1000BASE-LX mini-GBIC module
MGB-L50
SFP-Port 1000BASE-LX mini-GBIC module – 50km
MGB-L70
SFP-Port 1000BASE-LX mini-GBIC module – 70km
MGB-L120 SFP-Port 1000BASE-LX mini-GBIC module – 120km
MGB-LA10 SFP-Port 1000BASE-LX (WDM,TX:1310nm) – 10km
MGB-LA20 SFP-Port 1000BASE-LX (WDM,TX:1310nm) – 20km
MGB-LB20 SFP-Port 1000BASE-LX (WDM,TX:1550nm) – 20km
MGB-LA40 SFP-Port 1000BASE-LX (WDM,TX:1310nm) – 40km
MGB-LB40 SFP-Port 1000BASE-LX (WDM,TX:1550nm) – 40km
Fast Ethernet SFP Transceiver Modules
MFB-FX
SFP-Port 100BASE-FX Transceiver – 2km
MFB-F20
SFP-Port 100BASE-FX Transceiver – 20km
MFB-F60
SFP-Port 100BASE-FX Transceiver – 60km
MFB-FA20 SFP-Port 100BASE-BX Transceiver (WDM,TX:1310nm) – 20km
MFB-FB20 SFP-Port 100BASE-BX Transceiver (WDM,TX:1550nm) – 20km
It is recommended to use PLANET SFP on the LRP Managed Switch. If you insert an SFP
transceiver that is not supported, the LRP Managed Switch will not recognize it.