3 mld group table, 4 mld router setting – PLANET LRP-822CS User Manual
Page 177
User’s Manual of LRP-822CS
177
4.7.4.3 MLD Group Table
This page provides MLD Group Table. The MLD Group Table screen in
Figure 4-7-26
appears.
Figure 4-7-26 MLD Group Table Page Screenshot
The page includes the following fields:
Object
Description
VLAN ID
Display the current VID
Group IP Address
Display multicast IP address for a specific multicast service
Member Port
Display the current member port
Type
Member types displayed include Static or Dynamic, depending on selected
options
Life(Sec)
Display the current life
4.7.4.4 MLD Router Setting
Depending on your network connections, MLD snooping may not always be able to locate the MLD querier. Therefore, if the
MLD querier is a known multicast router/ switch connected over the network to an interface (port or trunk) on your LRP
Managed Switch, you can manually configure the interface (and a specified VLAN) to join all the current multicast groups
supported by the attached router. This can ensure that multicast traffic is passed to all the appropriate interfaces within the LRP
Managed Switch.
The MLD Router Setting screens in
Figure 4-7-27
&
Figure 4-7-28
appear.
Figure 4-7-27 Add Router Port Page Screenshot