PLANET LRP-822CS - Manual (Page 185)

User’s Manual of LRP-822CS
185
 When the access mode is set to deny, multicast join reports are only processed when the multicast group is not in the
controlled range.
4.7.7.1 Multicast Profile Setting
The Add Profile and Profile Status screens in Figure 4-7-36 & Figure 4-7-37 appear.
Figure 4-7-36 Add Profile Setting Page Screenshot
The page includes the following fields:
Object Description
 IP Type Select IPv4 or IPv6 from this drop-down list
 Profile Index Indicates the ID of this particular profile
 Group from Specifies multicast groups to include in the profile. Specify a multicast group range by
entering a start IP address.
 Group to Specifies multicast groups to include in the profile. Specify a multicast group range by
entering an end IP address.
Sets the access mode of the profile; either permit or deny.
- Permit Multicast join reports are processed when a multicast group falls
within the controlled range.
 Action
- Deny When the access mode is set to, multicast join reports are only
processed when the multicast group is not in the controlled range.