PLANET LRP-822CS - Manual (Page 290)

User’s Manual of LRP-822CS
290
4.11 MAC Address Table
Switching of frames is based upon the DMAC address contained in the frame. The LRP Managed Switch builds up a table that
maps MAC addresses to switch ports for knowing which ports the frames should go to (based upon the DMAC address in the
frame). This table contains both static and dynamic entries. The static entries are configured by the network administrator if the
administrator wants to do a fixed mapping between the DMAC address and switch ports.
The frames also contain a MAC address (SMAC address), which shows the MAC address of the equipment sending the frame.
The SMAC address is used by the switch to automatically update the MAC table with these dynamic MAC addresses. Dynamic
entries are removed from the MAC table if no frame with the corresponding SMAC address has been seen after a configurable
age time.
4.11.1 Static MAC Setting
The static entries in the MAC table are shown in this table. The MAC table is sorted first by VLAN ID and then by MAC address.
The Static MAC Setting screens in Figure 4-11-1 & Figure 4-11-2 appear.
Figure 4-11-1 Statics MAC Setting Page Screenshot
The page includes the following fields:
Object Description
 MAC Address Physical address associated with this interface
 VLAN Select VLAN from this drop-down list
 Port Select port from this drop-down list
Buttons
: Click to add new static MAC address.