PLANET LRP-822CS - Manual (Page 104)

User’s Manual of LRP-822CS
104
frames on the port are transmitted. The RX and TX settings are determined by
the result of the last Auto-Negotiation. Check the configured column to use flow
control. This setting is related to the setting for Configured Link Speed.
Buttons
: Click to apply changes.
Figure 4-4-7 LAG Port Status Page Screenshot
The page includes the following fields:
Object Description
 LAG The LAG for the settings contained in the same row
 Description Display the current description
 Port Type Display the current port type
 Enable State Display the current enable state
 Speed Display the current speed
 Duplex Display the current duplex mode
 Flow Control Config Display the current flow control configuration
 Flow Control Status Display the current flow control status