PLANET FGSW-2620VM - Manual (Page 191)

User’s Manual of FGSW-Series
191
poe priority
Description:
Set port priority for the power supply management.
The command is configurable while “poe limit-mode” is set to “Port Priority”
Command Level:
Global Configuration
Syntax:
poe priority { Critical | High | Low} [<port-list>]
Parameters:
{Critical | High | Low}
• Critical — Indicates that operating the powered device is high.
• High— Indicates that operating the powered device has medium priority.
• Low— Indicates that operating the powered device has low priority
<port-list> specifies the ports to be set. If not entered, all ports are set.
Example:
Switch (config)# poe priority low 1
Switch (config)# show poe status 1
Port Admin Oper Priority Power Limit[W]
Current
Consumption [W]
Current[mA]
Device
Class
Port1 Enable on
Low
15.4 13.4 279 0
poe maximum-power
Description:
Enabling or disabling per port power output limit.
The command is configurable while “poe limit-mode” is set to “Total-Limit”
Command Level:
Global Configuration
Syntax:
poe maximum-power <1~15.4> [<port-list>]
no poe mximum-power [<port-list>]
Parameters:
<1~15.4>
<port-list> specifies the ports to be set. If not entered, all ports are set.
Example:
Switch(config)# poe maximum-power 10 1