Port rate, Port priority, Port jumboframe – PLANET FGSW-2620VM User Manual
Page 148: Port description, Show port status
User’s Manual of FGSW-Series
148
port rate
Description:
Set port effective ingress or egress rate.
Syntax:
port rate
<ingress | egress> <0..8000> [<port-list>]
Parameters:
<0..8000> specifies the ingress or egress rate.<0..8000>
<port-list> specifies the ports to be set. If not entered, all ports are set.
port priority
Description:
Set port priority.
Syntax:
port priority
<disable | 0-7 > [<port-list>]
Parameters:
<port-list> specifies the ports to be set. If not entered, all ports are set.
port jumboframe
Description:
Set port jumbo frame. When port jumbo frame is enable, the port forward jumbo frame packet
Syntax:
port jumboframe
<enable | disable> [<port-list>]
Parameters:
<port-list> specifies the ports to be set. If not entered, all ports are set.
port description
Description:
User can set the description of specifics port.
Syntax:
port description
[description] [port list]
Parameters:
<port-list> specifies the ports to be set. If not entered, all ports are set.
show port status
Description:
Show port status, including port State, Link, Trunking, VLAN, Negotiation, Speed, Duplex, Flow control, Rate
control ,Priority, Security, BSF control.