PLANET FGSW-2620VM - Manual (Page 125)

User’s Manual of FGSW-Series
125
Port Set this field if Packet Type is IPv4, else ignore.
0~65535
If UDP port not find in UDP field, you can direct assign number.
Port Id Source port id, from 1~26, 0 means don’t care. 0
Current List You create ACL and Binding groups.
„ Non-IPv4 ACL
In ※Packet Type / Binding box should select ※Non-IPv4
Object Description Default Vaule
Group ID 1 ~ 247 (max. 247 ACL group)
Action Permit / Deny.
„ Permit: Permit packet cross switch.
„ Deny: Drop packet.
Permit
VLAN Any / VID.
„ Any: Any VLAN ID.
„ VID: 1~4094. A certain VLAN ID.
Any
Packet Type IPv4 / Non-IPv4 / Binding
„ IPv4: Set IPv4 packet field.
„ Non-IPv4: Set non-IPv4 packet field.
„ Binding: Set binding entry.
IPv4
Ether Type Set this field if Packet Type is Non-IPv4, else ignore.)
Any / ARP(0x0806) / IPX(0x8137)
Any
Type Set this field if Packet Type is Non-IPv4, else ignore.)
0~0xFFFF
If ether type not find in Ether Type field, you can direct assign
number.
Current List You create ACL and Binding groups.
„ Binding
Let device that has specific IP address and MAC address can use network. We can set specific IP address, MAC address,
VLAN id and port id to bind, and device can cross switch if all conditions match.
Use binding function; we should enable it first in following page.
In ※Packet Type / Binding box should select ※Binding.
Object Description Default Vaule
Group ID 1 ~ 247 (max. 247 ACL group)