PLANET FGSW-2620VM - Manual (Page 137)

User’s Manual of FGSW-Series
4.15 Power Over Ethernet
(FGSW-2620PVM / FGSW-2620VMP4 / FGSW-2612PVM)
Providing up to 24/12 PoE, in-line power interface, the FGSW-2620PVM / FGSW-2620VMP4 / FGSW-2612PVM PoE
Switch can easily build a power central-controlled IP phone system, IP Camera system, AP group for the enterprise. For
instance, 24/12 camera / AP can be easily installed around the corner in the company for surveillance demands or build a
wireless roaming environment in the office. Without the power-socket limitation, the PoE Switch makes the installation of
cameras or WLAN AP more easily and efficiently.
4.15.1 Power over Ethernet Powered Device
3~5 watts
PoE
Class1
Voice over IP phones
Enterprise can install POE VoIP Phone, ATA and other
Ethernet/non-Ethernet end-devices to the central where UPS is installed
for un-interrupt power system and power control system.
6~12 watts
PoE
Class2
Wireless LAN Access Points
Museum, Sightseeing, Airport, Hotel, Campus, Factory, Warehouse
can install the Access Point any where with no hesitation
10~12 watts
PoE
Class3
IP Surveillance
Enterprise, Museum, Campus, Hospital, Bank, can install IP Camera
without limits of install location – no need electrician to install AC
sockets.
3~12 watts
Vary
on PD.
PoE Splitter
PoE Splitter split the PoE 48V DC over the Ethernet cable into 5/12V DC
power output. It frees the device deployment from restrictions due to
power outlet locations, which eliminate the costs for additional AC wiring
and reduces the installation time.
137