PLANET FGSW-2620VM - Manual (Page 136)

User’s Manual of FGSW-Series
4.14.4 Misc Configuration
In this page, you can change the default configuration for the 802.1x standard:
Figure 4-14-6: 802.1x Misc Configuration interface
The page includes the following fields:
Object Description
Quiet Period:
Used to define periods of time during which it will not attempt to acquire a
supplicant.
Default time is 60 seconds.
TX Period:
Set the period the port waits for retransmit next EAPOL PDU during an
authentication session.
Default value is 30 seconds.
Supplicant Timeout:
Set the period of time the switch waits for a supplicant response to an EAP
request.
Default value is 30 seconds.
Server Timeout:
Set the period of time the switch waits for a server response to an authentication
request.
Default value is 30 seconds.
Max Requests:
Set the number of authentication that must time-out before authentication fails
and the authentication session ends.
Default value is 2 times.
Reauth period:
Set the period of time which clients connected must be re-authenticated.
Default value is 3600 seconds.
136